Wednesday, November 24, 2010

How to change front rotors on 1995 honda acord?

Take the tire off. There are either two or four bolts holding the caliper on the rotor. Unbolt the caliper and swing up and out of the way. Be careful not to pinch the brake line. There is a small cap in the center of the hub. Remove the cap and you will see a large nut with a cotter key in the middle. Straighten out the key and use pliers to remove. After the key is removed then remove the large nut. That will allow you to remove the rotor. When you put the new rotor on don't forget to put the outside wheel bearing and the flat washer back on before replacing the nut and cotter key. Takes a little time but is not that hard to do. Good luck...

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.